Tag Archives: pump screw

China wholesaler Mch-6 300bar Italian Scuba Diving Screw Air Compressor Pump with Great quality

Product Description

 

Introduction of MCH-6 300bar Italian Scuba Diving Screw Air Compressor Pump

300bar Air compressor 
Charging rate: 100 L/min 
Working pressure: 225 Bar – 300 Bar 
Driven by: Three phase electric motor zmwm02
MCH-6 300bar Breathing Air Respirator Filling Compressor is the smallest, lightest portable breathing air compressor in the whole industry, the petrol engine of MCH6 series only 37KG,can easily put in the trunk of the car,carry to use the site. It can be used in the fire, scuba diving, shooting, emergency rescue, chemical, oil field and other fields. MCH6 has high quality and its character of portable and simple design. The output of compressed air meets the criterion of EN12571.

Product Structure of MCH-6 300bar Italian Scuba Diving Screw Air Compressor Pump
Optional gasoline engine, three-phase, single-phase electric drive motor, V belt drive
Four cylinder level 4 high-pressure compressor
Stainless steel cooler between every level
Installed in the 400 bar high pressure on the compressor pressure gauge
1.2 CHINAMFG high pressure air tube, joints according to the needs of you
Stainless steel fan cover
Two oil-water separator, 2 drain valve (optional automatic decontamination)
Activated carbon molecular sieve filtration system
To set pressure automatic stop, prevent the relief valve frequent rev. Jump, ensure safety and security

Main Parameter of MCH-6 300bar Italian Scuba Diving Screw Air Compressor Pump

Model MCH-6/ET STHangZhouRD
Charging Rate 100L/Min-6m3/h-3.5CBM 
Filling Time Pressure 6.8L 0-300Bar/20Min
10L 0-200Bar/20Min
Working Pressure 225Bar/3200Psi
300Bar/4700Psi
Driven By Three-Phase Electric Motor
Power 3KW
Dimensions Height: 35cm   Width: 65cm  Depth: 39cm
35*65*39cm
Weight 39kg
Noise Pressure  83 db
No. Of Stages and Cylinders 4
Lubricating Oil Capacity 300cc (0.3L)
300ml
Lubricant  Coltri Oil CE 750 
Coltri Oil CE 750 
Frame Powder Coated Steel
Oil/Moisture Separator After Last Stage
Filtration Filter Cartridge Activated Carbon and Molecule 
Full Load Amp 11.5A(230V-50/60 HZ)
6.7A(400V-50/60 HZ
Interstage Coolers and After Coolers  Stainless Steel
Breathing Air EN 12571 CGA 
Suction Filter 2 Micro Paper–25 Micro Polyester
Full load Amp 11, 5 A (230 V – 50/60Hz) 6, 7 A (400 V – 50/60Hz)
Safety valve On the separator housing

 

Photos of MCH-6 300bar Italian Scuba Diving Screw Air Compressor Pump

Lubrication Style: Lubricated
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Structure Type: Closed Type
Installation Type: Movable Type
Customization:
Available

|

air compressor

What are the energy-saving technologies available for air compressors?

There are several energy-saving technologies available for air compressors that help improve their efficiency and reduce energy consumption. These technologies aim to optimize the operation of air compressors and minimize energy losses. Here are some common energy-saving technologies used:

1. Variable Speed Drive (VSD) Compressors:

VSD compressors are designed to adjust the motor speed according to the compressed air demand. By varying the motor speed, these compressors can match the output to the actual air requirement, resulting in energy savings. VSD compressors are particularly effective in applications with varying air demands, as they can operate at lower speeds during periods of lower demand, reducing energy consumption.

2. Energy-Efficient Motors:

The use of energy-efficient motors in air compressors can contribute to energy savings. High-efficiency motors, such as those with premium efficiency ratings, are designed to minimize energy losses and operate more efficiently than standard motors. By using energy-efficient motors, air compressors can reduce energy consumption and achieve higher overall system efficiency.

3. Heat Recovery Systems:

Air compressors generate a significant amount of heat during operation. Heat recovery systems capture and utilize this wasted heat for other purposes, such as space heating, water heating, or preheating process air or water. By recovering and utilizing the heat, air compressors can provide additional energy savings and improve overall system efficiency.

4. Air Receiver Tanks:

Air receiver tanks are used to store compressed air and provide a buffer during periods of fluctuating demand. By using appropriately sized air receiver tanks, the compressed air system can operate more efficiently. The tanks help reduce the number of starts and stops of the air compressor, allowing it to run at full load for longer periods, which is more energy-efficient than frequent cycling.

5. System Control and Automation:

Implementing advanced control and automation systems can optimize the operation of air compressors. These systems monitor and adjust the compressed air system based on demand, ensuring that only the required amount of air is produced. By maintaining optimal system pressure, minimizing leaks, and reducing unnecessary air production, control and automation systems help achieve energy savings.

6. Leak Detection and Repair:

Air leaks in compressed air systems can lead to significant energy losses. Regular leak detection and repair programs help identify and fix air leaks promptly. By minimizing air leakage, the demand on the air compressor is reduced, resulting in energy savings. Utilizing ultrasonic leak detection devices can help locate and repair leaks more efficiently.

7. System Optimization and Maintenance:

Proper system optimization and routine maintenance are essential for energy savings in air compressors. This includes regular cleaning and replacement of air filters, optimizing air pressure settings, ensuring proper lubrication, and conducting preventive maintenance to keep the system running at peak efficiency.

By implementing these energy-saving technologies and practices, air compressor systems can achieve significant energy efficiency improvements, reduce operational costs, and minimize environmental impact.

air compressor

How are air compressors utilized in pneumatic tools?

Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:

Power Source:

Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.

Air Pressure Regulation:

Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.

Air Volume and Flow:

Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.

Tool Actuation:

Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.

Versatility:

One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.

Portability:

Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.

Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.

air compressor

How do oil-lubricated and oil-free air compressors differ?

Oil-lubricated and oil-free air compressors differ in terms of their lubrication systems and the presence of oil in their operation. Here are the key differences:

Oil-Lubricated Air Compressors:

1. Lubrication: Oil-lubricated air compressors use oil for lubricating the moving parts, such as pistons, cylinders, and bearings. The oil forms a protective film that reduces friction and wear, enhancing the compressor’s efficiency and lifespan.

2. Performance: Oil-lubricated compressors are known for their smooth and quiet operation. The oil lubrication helps reduce noise levels and vibration, resulting in a more comfortable working environment.

3. Maintenance: These compressors require regular oil changes and maintenance to ensure the proper functioning of the lubrication system. The oil filter may need replacement, and the oil level should be regularly checked and topped up.

4. Applications: Oil-lubricated compressors are commonly used in applications that demand high air quality and continuous operation, such as industrial settings, workshops, and manufacturing facilities.

Oil-Free Air Compressors:

1. Lubrication: Oil-free air compressors do not use oil for lubrication. Instead, they utilize alternative materials, such as specialized coatings, self-lubricating materials, or water-based lubricants, to reduce friction and wear.

2. Performance: Oil-free compressors generally have a higher airflow capacity, making them suitable for applications where a large volume of compressed air is required. However, they may produce slightly more noise and vibration compared to oil-lubricated compressors.

3. Maintenance: Oil-free compressors typically require less maintenance compared to oil-lubricated ones. They do not need regular oil changes or oil filter replacements. However, it is still important to perform routine maintenance tasks such as air filter cleaning or replacement.

4. Applications: Oil-free compressors are commonly used in applications where air quality is crucial, such as medical and dental facilities, laboratories, electronics manufacturing, and painting applications. They are also favored for portable and consumer-grade compressors.

When selecting between oil-lubricated and oil-free air compressors, consider the specific requirements of your application, including air quality, noise levels, maintenance needs, and expected usage. It’s important to follow the manufacturer’s recommendations for maintenance and lubrication to ensure the optimal performance and longevity of the air compressor.

China wholesaler Mch-6 300bar Italian Scuba Diving Screw Air Compressor Pump   with Great qualityChina wholesaler Mch-6 300bar Italian Scuba Diving Screw Air Compressor Pump   with Great quality
editor by CX 2023-10-11